Installing a synthetic golf green from Putting Greens Direct is simple, all you need to do is follow the simple step-by-step procedures outlined below. Remember, greens larger than 500 square feet are best installed by a certified Putting Greens Direct Distributor.
Simply contact us to get your green installed for you.

Step By Step Installation Instructions

1. Determine location and size.
2. Clear area for sub-base.
3. Distribute the sub-base material.
4. Compact sub-base.
5. Determine placement of sleeves/cups.
6. Dig holes for sleeves/cups.
7. Place sleeves.
8. Ready turf for seams (if applicable).
9. Lay turf over sub-base.
10. Seam the turf (if applicable).
11. Cut outer edge of turf to design.
12. Cut the holes and install the cups.
13. Secure outer edge of turf.
14. Sand-fill (if applicable).
15. Finishing the green.
16. Sink a putt and have fun!

Review all of the steps before beginning the installation process.
Contact us if you need technical assistance or if you have any questions.

  back to top